How this site is built
Review the calculation methodology to see which figures are exact geometry, which depend on material assumptions, and which figures have recorded sources. The source registry records every cited figure and its review status.
How the square footage calculator works
Square footage is surface area, not perimeter. The calculator converts each measurement to one unit, applies the selected shape formula, and then shows equivalent area units.
Keep separate shapes separate when a room or site is irregular. Calculate each non-overlapping part, add the areas, and only then apply a material-specific waste allowance.
Formula used for square footage calculator
The calculator keeps the measured quantity separate from any purchase rounding or allowance.
- Rectangle
area = length × width - Circle
area = π × (diameter ÷ 2)² - Triangle
area = base × perpendicular height ÷ 2 - Convert
1 square yard = 9 square feet
Planning choices for square footage calculator
| Situation | Use | Why it matters |
|---|---|---|
| Single rectangle | Rectangle mode | One length and width give the full area |
| Round surface | Circle mode | Diameter defines the measured circle |
| L-shaped room | Split into rectangles | Prevents counting the missing corner |
| Area from plans | Known-area mode | Avoids re-entering dimensions |
These are measurement and ordering choices, not structural specifications or code requirements.
Measure and order square footage
Measure along the same finished plane. A sloped roof face is longer than its horizontal footprint, and a wall area does not include the floor.
Use this result as the clean geometric starting point. Tile, paint, flooring and other materials need their own coverage and allowance decisions.
Square Footage Calculator questions
Is square footage the same as feet squared?
Yes. Square feet, ft² and feet squared are different ways of writing the same area unit.
Do I add waste here?
No. Keep geometry clean and add waste in the calculator for the material you are buying.
How do I measure an L-shaped room?
Divide it into non-overlapping rectangles, calculate each area, and add the results.
Variables and units
For the default “Rectangle” mode. Other modes label their own fields in the calculator.
length- Length: ft, in, yd, m, cm.
width- Width: ft, in, yd, m, cm.
Worked example: a 14 ft by 11 ft room
A room measures 14 ft long and 11 ft wide before any material allowance.
| Field | Value |
|---|---|
| Length | 14 ft |
| Width | 11 ft |
| Result | Value |
|---|---|
| Square feet | 154 ft² |
| Square yards | 17.1 yd² |
| Square metres | 14.3 m² |
These figures are generated by the same calculation the calculator above uses, so they update automatically if the method changes.
Where these numbers come from
This calculator uses geometry and values shown in the form. Editable product dimensions, coverage figures, prices and allowances are inputs, not universal recommendations; confirm them against the product label, drawing or supplier quote.
Content release:
Published by Material Totals. Review the methodology and source assumptions.
Related calculators
- Cubic Feet CalculatorCalculate cubic feet for a rectangular space and see the equivalent cubic yards and metres.
- Cubic Yards CalculatorCalculate cubic yards from the length, width and depth of a rectangular space.
- Feet and Inches CalculatorConvert feet and inches to decimal feet, or split decimal feet back into a tape reading.
- Cubic Yards to Tons CalculatorConvert cubic yards of bulk material to approximate tons with an editable density.
- Tons to Cubic Yards CalculatorConvert tons of bulk material to approximate cubic yards with an editable density.
- Dump Truck Load CalculatorConvert a bulk-material volume into whole dump-truck loads using an editable capacity.