Concrete and Masonry Calculators
Plan concrete volumes and masonry unit counts with visible geometry, product assumptions and purchase rounding.
Concrete and masonry
18 focused quantity tools
- Concrete CalculatorWork out the cubic yards and bags of concrete to order for your pour.
- Concrete Bag CalculatorConvert a required concrete volume into whole bags using the yield printed on your mix.
- Brick CalculatorEstimate whole bricks from wall dimensions, exposed brick face, mortar joint and waste.
- Paver CalculatorEstimate whole pavers from the paved area, paver dimensions, joint width and cuts.
- Retaining Wall Block CalculatorEstimate face blocks from wall length, height, exposed block dimensions, joints and cuts.
- Concrete Slab CalculatorEstimate concrete for a rectangular slab from its finished length, width, thickness and allowance.
- Concrete Footing CalculatorEstimate ready-mix concrete for continuous or isolated rectangular footings.
- Concrete Wall CalculatorEstimate concrete volume for a solid formed wall before reinforcement or opening adjustments.
- Concrete Column / Sonotube CalculatorEstimate concrete for round columns, piers and cylindrical forms.
- Concrete Stairs CalculatorEstimate the solid stepped-section volume of a straight concrete stair run.
- Concrete Truck Load CalculatorConvert a required concrete volume into whole truckloads using an editable truck capacity.
- Concrete Block / CMU CalculatorEstimate whole concrete masonry units from wall dimensions and nominal block face size.
- Mortar CalculatorEstimate mortar bags from masonry area and editable bag coverage.
- Masonry Grout CalculatorEstimate masonry grout bags from grouted wall area and a product-specific coverage value.
- Concrete Block Fill CalculatorEstimate grout or concrete fill from block count and editable core-fill volume.
- Paver Base CalculatorEstimate compacted aggregate base for a paver area from finished dimensions and depth.
- Paver Sand CalculatorEstimate bedding sand under pavers from area, finished bedding depth and allowance.
- Stone Veneer CalculatorEstimate stone-veneer purchase units from wall area and editable package coverage.
Use the measured quantity first
Start with the drawing or a defensible site measurement. Keep geometry separate from product coverage, compaction, cuts and purchase rounding so each decision stays visible.
These tools estimate quantities. They do not choose structural sizes, verify code compliance or replace a manufacturer installation specification.