How this site is built
Review the calculation methodology to see which figures are exact geometry, which depend on material assumptions, and which figures have recorded sources. The source registry records every cited figure and its review status.
How the topsoil calculator works
The finished soil layer is area times depth. The calculator then increases that geometric volume by the settling and handling allowance entered by the user.
Soil blends vary widely in moisture and organic content. Cubic yards are useful for volume orders; weight should come from the supplier.
Formula used for topsoil calculator
The calculator keeps the measured quantity separate from any purchase rounding or allowance.
- Surface area
measured shape or known area - Finished volume
area × finished depth - Loose order
finished volume × (1 + settling allowance) - Bag count
loose cubic feet ÷ labelled bag volume, rounded up
Planning choices for topsoil calculator
| Situation | Use | Why it matters |
|---|---|---|
| Lawn topdressing | Use shallow measured depth | Small depth changes drive the order |
| Raised bed fill | Subtract existing fill | Only replacement volume is needed |
| Final grade varies | Calculate zones | A single average can hide low spots |
These are measurement and ordering choices, not structural specifications or code requirements.
Measure and order topsoil
Take level readings when grading rather than guessing from the deepest point. Calculate distinct depth zones separately.
Ask whether the quote is screened topsoil, a planting mix or another blend; equal cubic yards can have different settling behaviour.
Topsoil Calculator questions
Why add a settling allowance?
Loose soil loses volume after placement, watering and consolidation. Enter a factor appropriate to the actual blend.
Does this include compost?
Only if compost is part of the dimensions and blend you are ordering.
Can I order by tons?
Use a supplier conversion because moisture and blend composition change weight.
Variables and units
For the default “Rectangular area” mode. Other modes label their own fields in the calculator.
length- Length: ft, in, yd, m, cm.
width- Width: ft, in, yd, m, cm.
depth- Finished depth: in, ft, yd, m, cm.
allowance- Settling and waste allowance: %; optional.
bagVolume- Volume per bag: ft³; optional.
bulkPrice- Bulk price per cubic yard: per yd³; optional.
bagPrice- Price per bag: per bag; optional.
Worked example: 500 ft² at 4 in finished depth
A lawn repair covers 500 square feet at 4 inches finished depth with 15% extra for settling and a 1.5 ft³ bag size copied from the label.
| Field | Value |
|---|---|
| Area | 500 ft² |
| Finished depth | 4 in |
| Settling and waste allowance | 15 % |
| Volume per bag | 1.5 ft³ |
| Bulk price per cubic yard | 0 per yd³ |
| Price per bag | 0 per bag |
| Result | Value |
|---|---|
| Order volume | 7.1 yd³ |
| Whole bags to buy | 128 bags |
These figures are generated by the same calculation the calculator above uses, so they update automatically if the method changes.
Where these numbers come from
This calculator uses geometry and values shown in the form. Editable product dimensions, coverage figures, prices and allowances are inputs, not universal recommendations; confirm them against the product label, drawing or supplier quote.
Content release:
Published by Material Totals. Review the methodology and source assumptions.
Related calculators
- Mulch CalculatorCalculate bulk or bagged mulch from bed area, target depth, the bag label and your allowance.
- Gravel CalculatorWork out the tons and cubic yards of gravel to order for any area.
- Asphalt CalculatorCalculate asphalt tons and cubic yards from area, compacted depth and mix density.
- Road Base CalculatorCalculate road-base order volume from area, finished depth and your compaction allowance.
- Sand CalculatorCalculate sand volume from area, finished depth and an editable settling or waste allowance.
- Crushed Stone CalculatorEstimate crushed stone by volume and weight with an editable bulk density.